UP12D20-GTEW
The product photo shows a representative model. Specifications and appearance may vary.
Model:UP12D20-GTEW
Series:P12D-GTEW
Catalog PDF
Standards
| Classification | Axial Fan |
|---|---|
| Environmental Measures | Dustproof / Waterproof Type |
| Dimensions | □120x40 |
| Frame Size | □120 |
| Frame Thickness | 40 |
| Phase | Single-Phase |
| Power Supply | AC |
| Rated Voltage [V] | 200 |
| Frequency [Hz] | 50/60 |
| Input power [W] | 16/15 |
|---|---|
| Current [A] | 0.12/0.11 |
| Rotation speed [min-1] | 2650/3000 |
| Maximum Airflow [ｍ3/min] | 2.5/2.8 |
| Maximum Airflow [CFM] | 88.28/98.87 |
| Maximum Static Pressure [Pa] | 73.5/64.6 |
| Maximum Static Pressure [inH2O] | 0.29/0.25 |
| Noise [dB(A)] | 41/45 |
| Mass [kg] | 0.65 |
| Service Life | - |
|---|
| Sensor | |
|---|---|
Fan sensorsetting not available. |
|
Safety Standards
| [UL] | [CE] | [c-ULus] | [TUV] | [PSE] |
|---|---|---|---|---|
| - | - | ◯ | ◯ | ◯ |
Specifications
| Motor Type | Single-Phase Shaded Pole Induction Motor |
|---|---|
| Material (Blade) | Resin |
| Material (Frame / Case) | Aluminum Die-Cast |
| Material (Base [for Non-Frame Models]) | - |
| Insulation Class | Class A 105℃(UL),Class E 120℃ |
| Bearing | Ball Bearing |
| Operating Temperature Range | -30~+70 |
| Operating Humidity Range | 0-98% RH (non-condensing) |
| Storage Temperature Range | -40~+85 |
| Storage Humidity Range | RH20~85%(non-condensing) |
| IP Code | IP65 compliant |
|---|---|
| Operating Voltage Range | Voltage fluctuation: Within ±10% of rated voltage Continuous operation: At or below rated voltage |
| Protection Method | Impedance Protection |
| Noise characteristics | Measured at 1.5 m from equipment surface (centerline of air inlet) |
| Airflow–Static Pressure Characteristics | Double Chamber Method (AMCA210) |
| Dielectric Strength | AC2000V for 1 minute or AC2400V for 1 second (Leakage current ? 0.5 mA, room temperature and humidity, 50Hz) |
| Insulation Resistance | 100 MΩ or more when 500 V DC is applied between the windings and the frame under normal ambient conditions. |
| Lead Wire Specifications | SPT1/AWG18 (UL,CSA) |
| Grounding Specifications | |
|---|---|
All models: Grounding terminal processed and earth screw installed. |
|
■ Features
Dust and Water Resistant (IP65)
※Installation Orientation
When the product is installed with the product label (discharge side) facing upward, water may accumulate in the inner cylindrical section at the center of the blade depending on the amount of water exposure.
Please confirm this condition before adoption.
Option1
| Product Name | Finger Guard |
|---|---|
| Model | IG-120 |
 |
|